Les publications

Par mot clé
Par auteur
Par type
Par date
Année min.
Année max.
Sélctionner dans

Revues internationales

2014

Julian Soulacroix, Bruno Michel, Jean-Marie Gatt, Régis Kubler, Laurent Barrallier An aging elasto-viscoplastic model for ceramics. International Journal of Plasticity. Volume : 62. Pages : 121-137. 2014. Elsevier.

Léonard Antoinat, Régis Kubler, Jean-Luc Barou, Philippe Viot, Laurent Barrallier Perforation of aluminium alloy thin plates. International Journal of Impact Engineering (accepted/ in press). Volume : . Pages : . 2014. .

2013

Hemmouche L., Chicot D., Amrouche A., Iost A., Belouchrani M.A., Decoopman X., Louis G., Puchi-Cabrera E.S. An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques. Material Science and Engineering. A. Volume : 585. Pages : 155-164. 2013. .

Chicot D., Puchi-Cabrera E.S., Iost A., Staia M.H., Decoopman X., Roudet F., Louis G. An analysis of the Indentation Size Effect in Copper and its alloys. Material Science end Technology. Volume : 29. Pages : 868-876. 2013. .

Bigerelle M., Najjar D., Mathia T., Iost A., Coorevits T., Anselme K. An expert system to characterize the surfaces morphological properties according to their Tribological functionalities: the relevance of a pair of roughness parameters. Tribology International. Volume : 59. Pages : 190-202. 2013. .

Staia M., Lesage J., Chicot D., Suarez M., Iost A., Puchi Cabrera E.S. Cr2C3-NiCr vps thermal spray coatings as candidate for chromium replacement. Surface Coatings and Technology. Volume : 220. Pages : 225-231. 2013. .

Xia Y., Bigerelle M., Marteau J., Mazeran P.E., Bouvier S., Iost A. Effect of surface roughness in the determination of the mechanical properties of material using nanoindentation test. Scanning. Volume : . Pages : . 2013. .

La Barbera-Sosa J.G., Santana Y.Y., Villalobos-Gutiérrez C., Chicot D., Lesage J., Decoopman X., Iost A., Staia M.H., Puchi-Cabrera E.S. Fatigue behavior of a structural steel coated with a WC-10Co-4Cr/Colmonoy 88 deposit by HVOF Thermal Spraying. Surface Coatings and technology. Volume : 220. Pages : 248-256. 2013. .

Iost A., Fracture toughness evaluation of brittle or ductile materials by indentation testing. Revue de Métallurgie. Volume : 110. Pages : 215-233. 2013. .

Staia M.H., Puchi-Cabrera E.S., Santana Y.Y., La Barbera-Sosa J.G., Iost A., Chicot D., Perez Delgado Y., De Baets P. Increase of the load carrying capacity of Aluminum 2024-T3 by means of a NiP-CrC-DLC coating. International Journal of Sustainable Construction & Design. Volume : . Pages : . 2013. .

Hennebelle F., Coorevits T., Bigerelle M. Optimization of the straightness measurements on rough surfaces by Monte Carlo simulation. Scanning. Volume : . Pages : . 2013. .

Fabre A., Evans H.P., Barrallier L., Sharif K.J., Desvignes M. Prediction of microgeometrical influences on micropitting fatigue damage on 32CrMoV13 steel. Tribology International. Volume : 59. Pages : 129-140. 2013. .

Marteau J., Bigerelle M., Bouvier S., Iost A. Reflection on the use of the topography of the indentation imprint. Scanning . Volume : . Pages : . 2013. .

Bigerelle M., Nianga J.M., Najjar D., Iost A., Hubert C., Kubiak K.J. Roughness Signature of Tribological Contact Calculated by a New Method of Peaks Curvature Radius Estimation on Fractal Surfaces. Tribology International. Volume : 65. Pages : 235-247. 2013. .

Staia M.H., Puchi-Cabrera E.S., Iost A., Carrasquero E., Santana Mendez Y.Y., La Barbera Sosa J. G., Chicot D., Van Gorp A. Sliding wear of a-C:H coatings against alumina in corrosive media. Diamond and related Materials. Volume : 38. Pages : 139-147. 2013. .

Bannour S., Abderrazak K., Mattei S., Masse J.E., Autric M., Mhiri H. The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds. Journal of Laser Applications. Volume : 25. Pages : 1-8. 2013. .

Fellah M., Labaïz M., Assala O., Iost A., Dekhil L. Tribological behaviour of AISI 316L stainless steel for biomedical applications. Tribology-Materials, Surfaces & Interfaces. Volume : 7. Pages : 135-149. 2013. .

2012

Iost A., Guillemot G., Rudermann Y., Bigerelle M. A comparison of models for predicting the true hardness of thin films. Thin Solid Films. Volume : . Pages : . 2012. .

Xia Y., Bigerelle M., Marteau J., Mazeran P-J., Bouvier S., Iost A. Effect of surface roughness in the determination of the mechanical properties of material using nanoindentation test. Scanning. Volume : . Pages : . 2012. .

Fabre A., Masse J.E. Friction behavior of laser cladding magnesium alloy against AISI 52100 steel. Tribology International. Volume : 46. Numéro : 1. Pages : 247-253. 2012. .

Commin L., Dumont M., Rotinat R., Pierron F., Masse J.E., Barrallier L. Influence of the microstructural changes and induced residual stresses on tensile properties of wrought magnesium alloy friction stir welds. Materials Science and Engineering: A. Volume : 551. Pages : 288-292. 2012. .

Chaise T., Li J., Nélias D., Kubler R., Taheri S., Douchet G., Robin V., Gilles P. Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (USP). Journal of Materials Processing Technology. Volume : 212. Numéro : 10. Pages : 2080–2090. 2012. .

Abdel-Aal H.A., Vargiolu R., Zahouani H., El Mansori M. Preliminary investigation of the frictional response of reptilian shed skin. Wear. Volume : doi.org/10.1016/j.wear.2012.05.015. Pages : . 2012. .

2011

Jarrah A., Bigerelle M., Guillemot G., Najjar D., Iost A., Nianga J.-M. A generic statistical methodology to predict the maximum pit depth of a localized corrosion process. Corrosion Science. Volume : 53. Pages : 2453-2467. 2011. .

Jarrah A., Bigerelle M., Guillemot G., Najjar D., Iost A., Nianga J.-M. A generic statistical methodology to predict the maximum pit depth of a localized corrosion process. Corrosion Science. Volume : 53. Pages : 2453-2467. 2011. .

Jegou S., Barrallier L., Kubler R., Somers M.A.J. Evolution of residual stress in diffusion zone of a model Fe-Cr-C alloy during nitriding.. HTM Journal of Heat Treatment and Materials . Volume : 66. Numéro : 3. Pages : 135-142. 2011. .

Fabre A., Barrallier L., Desvignes M., Evans H.P., Alanou M. Microgeometrical influences on micropitting fatigue damage: Multi-scale analysis. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. Volume : 225. Numéro : 10. Pages : 419-427. 2011. .

Deleuze C., Barrallier L., Fabre A., Molinas O., Esbérard C. Microstructures characterization of a biphasic titanium alloy Ti-10V-2Fe-3Al and effects induced by the heterogeneities on X-ray diffraction peak’s broadening. . Materials Science and Technology . Volume : 27. Numéro : 10. Pages : 1574-1581. 2011. .

Rudermann Y., Iost A., Bigerelle M. Scratch tests to contribute designing performance maps of multilayer polymeric coatings. Tribology International. Volume : 44. Pages : 585-591. 2011. .

Rudermann Y., Iost A., Bigerelle M. Scratch tests to contribute designing performance maps of multilayer polymeric coatings. Tribology International. Volume : 44. Pages : 585-591. 2011. .

Kubler R., Berveiller M., Buessler P. Semi phenomenological modelling of the behavior of TRIP steels. International Journal of Plasticity. Volume : 27. Numéro : 299-327. Pages : . 2011. .

Kouadri A., Barrallier L. Study of mechanical properties of AZ91 magnesium alloy welded by laser process taking into account the anisotropy microhardness and residual stresses by x-ray diffraction.. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. Volume : 42. Numéro : 7. Pages : 1815-1826. 2011. .

Behnamghader A., Neghabat Shirazi R., Iost A., Najjar D. Surface cracking and degradation of dense hydroxyapatite through Vickers microindentation testing. Applied Mechanics and Materials. Volume : 66-68. Pages : 614-619. 2011. .

Behnamghader A., Neghabat Shirazi R., Iost A., Najjar D. Surface cracking and degradation of dense hydroxyapatite through Vickers microindentation testing. Applied Mechanics and Materials. Volume : 66-68. Pages : 614-619. 2011. .

Commin L., Dumont M., Rotinat R., Pierron F., Masse J.E., Barralier L. Texture evolution in Nd:yag-laser welds of AZ31 magnesium alloy hot rolled sheets and its influence on mechanical properties.. Materials Science and Engineering: A. Volume : 528. Numéro : 4-5. Pages : 2049-2055. 2011. .

Hammouda N., Chadli H., Guillemot G., Belmokre K. The Corrosion Protection Behaviour of Zinc Rich Epoxy Paint in 3% NaCl Solution. Advances in Chemical Engineering and Science. Volume : 1. Pages : 51-60. 2011. .

Hammouda N., Chadli H., Guillemot G., Belmokre K. The Corrosion Protection Behaviour of Zinc Rich Epoxy Paint in 3% NaCl Solution. Advances in Chemical Engineering and Science. Volume : . Pages : 51-60. 2011. .

2010

Bigerelle M., Bounichane B., Hagege B., Jourani A., Iost A. A new model of the heat transfer in materials, the surfacic potential algorithm. International Journal of Materials and Product Technology. Volume : 38. Pages : 66-77. 2010. .

MKADDEM A., EL MANSORI M. An equivalent ellipse method to analyse the fatigue behaviour following 'multi-surface initiations'. International Journal of Mechanical Sciences. Volume : 52. Numéro : 9. Pages : 1125-1135. 2010. Elsevier.

Brunel F., Dufrénoy P., Charley J., Demilly F. Analysis of the attenuation of railway squeal noise by preloaded rings inserted in wheels. Journal of the Acoustical Society of America. Volume : 127. Pages : 1300-6. 2010. .

Belhadj A., Masse J.E., Barrallier L., Bouhafs M., Bessrour J. CO2 laser beam welding of AM60 magnesium-based alloy.. Journal of Laser Applications . Volume : 22. Numéro : 2. Pages : 56-61. 2010. .

Guillemot G., Iost A., Chicot D. Comments on the paper "Modification of composite hardness models to incorporate indentation size effects in thin films", D. Beegan, S. Chowdhury and M.T. Laugier. Thin Solid Films. Volume : 518. Pages : 2097–2101. 2010. .

Tlili B., Mustapha N., Nouveau C., Benlatreche Y., Guillemot G., Lambertin M. Correlation between thermal properties and aluminum fractions in CrAlN layers deposited by PVD technique. Vacuum. Volume : 84. Pages : 1067-1074. 2010. .

DEMIRCI I., MEZGHANI S., MKADDEM A., EL MANSORI M. Effects of abrasive tools on surface finishing under brittle-ductile grinding regimes when manufacturing glass. Journal of Materials Processing Technology. Volume : 210. Numéro : 3. Pages : 266-273. 2010. Elsevier.

VAN GORP A., BIGERELLE M., EL MANSORI M., GHIDOSSI P., IOST A. Effects of working parameters on the surface roughness in belt grinding process: The size-scale estimation influence. International Journal of Materials and Product Technology. Volume : 38. Numéro : 1. Pages : 16-34. 2010. Inderscience.

Van Gorp A., Bigerelle M., El Mansori M., Ghidossi P., Iost A. Effects of working parameters on the surface roughness in belt grinding process: the size-scale estimation influence. Int. J. Materials and Product Technology. Volume : 38. Pages : 16-34. 2010. .

Khalfaoui W., Valerio E., Masse J.E., Autric M. Excimer laser treatment of ze41 magnesium alloy for corrosion resistance and microhardness improvement. Optics and Lasers in Engineering . Volume : 48. Numéro : 9. Pages : 926-931. 2010. .

Belhadj A., Bessrou J., Masse J.E., Bouhafs M., Barrallier L. Finite element simulation of magnesium alloys laser beam welding. Journal of Materials Processing Technology. Volume : 210. Numéro : 9. Pages : 1131-1137. 2010. .

ABDEL-AAL H.A., EL MANSORI M., MEZGHANI S. Multi-scale investigation of surface topography of ball python (python regius) shed skin in comparison to human skin. Tribology Letters. Volume : 37. Numéro : 3. Pages : 517-527. 2010. Elsevier.

Arbaoui L., Masse J.E., Barrallier L., Mocellin K. Numerical modelling of laser rapid prototyping by fusion wire deposit. International Journal of Material Forming . Volume : 3. Numéro : 3. Pages : 1095-1098. 2010. .

EL MANSORI M., MEZGHANI S., SABRI L., ZAHOUANI H. On concept of process signature in analysis of multistage surface formation. Surface Engineering. Volume : 26. Numéro : 3. Pages : 216-223. 2010. Maney Publishing.

Jégou S., Kubler R., Barrallier L. On residual stresses development during nitriding of steel: Thermochemical and time dependence. Advanced Materials Research. Volume : 89-91. Pages : 256-261. 2010. .

Jarrah A., Nianga J.-M., Iost A., Guillemot G., Najjar D. On the detection of corrosion pits interactions using two-dimensional spectral analysis. Corrosion Science. Volume : 52. Pages : 303-313. 2010. .

Jégou S., Barrallier L., Kubler R. Phase transformations and induced volume changes in a nitrided ternary Fe-3%Cr-0.345%C alloy. Acta Materialia. Volume : 58. Numéro : 7. Pages : 2666-2676. 2010. .

MKADDEM A., HUGUET A., EL MANSORI M. Recrystallisation of austenite grain when non-isotherm steel working: Effects of thermal kinetics and deformation-based mechanisms. Materials and Design. Volume : 31. Numéro : 10. Pages : 4808-4815. 2010. Elsevier.

Bigerelle M., Abdel-Aal H., Iost A. Relation between entropy, free energy and computational energy. Int. J. Materials and Product Technology. Volume : 38. Pages : 35-43. 2010. .

Kubler R., Berveiller M., Buessler P., Lemoine, X. Semi Phenomenological Modelling of the Behaviour of Trip Steels- Application to Sheet Metal Forming. International Journal of Material Forming. Volume : 3. Pages : 69-72. 2010. .

2009

PIERRON F., A novel method for measuring the through-thickness shear moduli of anisotropic plates from surface deformation measurements. Composites Part A: Applied Science and Manufacturing. Volume : 40. Numéro : 12. Pages : 1815-1825. 2009. Elsevier.

MEZLINI S., BEN TKAYA M., EL MANSORI M., ZAHOUANI H., KAPSA PH. Correlation between tribological parameters and wear mechanisms of homogeneous and heterogeneous material. tribology Letters. Volume : 33. Pages : 153-159. 2009. Springer.

MKADDEM A., EL MANSORI M. Effect of machining parameters on high-cycle fatigue behaviour of aluminum matrix composites reinforced with silicon carbide particulates. International Journal of Computer Applications in Technology. Volume : 36. Numéro : 1. Pages : 38-46. 2009. Inderscience.

ZAHOUANI H., MEZGHANI S., PAILLER-MATTEI C., EL MANSORI M. Effect of roughness scale on contact stiffness between solids. Wear. Volume : 266. Numéro : 5-6. Pages : 589-591. 2009. Elsevier.

XAVIER J., AVRIL S., PIERRON F., MORAIS J., LOUSADA J. Evaluation of the stiffness radial variability of P. pinaster within the stem. Composites Part A: Applied Science and Manufacturing. Volume : 40. Numéro : 12. Pages : 1953-1960. 2009. Elsevier.

Belhadj A., Bessrour J., Bouhafs M., Barrallier L. Experimental and theoretical cooling velocity profile inside laser welded metals using keyhole approximation and boubaker polynomials expansion. Journal of Thermal Analysis and Calorimetry . Volume : 97. Numéro : 3. Pages : 911-915. 2009. .

MKADDEM A., EL MANSORI M. Finite element analysis when machining UGF-reinforced PMCs plates: Chip formation, crack propagation and induced-damage. Materials and Design. Volume : 30. Numéro : 8. Pages : 3295-3302. 2009. Elsevier.

Commin L., Masse J.E., Dumont M., Barrallier L. Friction stir welding of AZ31 magnesium alloy rolled sheets - influence of processing parameters. Acta Materiala . Volume : 57. Numéro : 2. Pages : 326-334. 2009. .

FOUILLAND-PAILLÉ L., EL MANSORI M., MASSAQ A. Friction-induced work hardening of cobalt-base hardfacing deposits for hot forging tools. Journal of Materials Processing Technology. Volume : 209. Numéro : 7. Pages : 3366-3373. 2009. Elsevier.

MOULART R., ROTINAT R., PIERRON F. Full-field evaluation of the onset of microplasticity in a steel specimen. Mechanics of Materials. Volume : 41. Numéro : 11. Pages : 1207-1222. 2009. Elsevier.

MAQUIN F., PIERRON F. Heat dissipation measurements in low stress cyclic loading of metallic materials: from internal friction to micro-plasticity. Mechanics and Materials. Volume : 41. Numéro : 8. Pages : 928–942. 2009. Elsevier.

COMMIN L., ROTINAT R., PIERRON F., MASSE J.-E., BARRALLIER L. Identification of shear bands in AZ31 friction stir welds and laser beam welds. Materials Science and Technology. Volume : 25. Numéro : 10. Pages : 1215-1221. 2009. Maney Publishing.

KREMER A., EL MANSORI M. Influence of nanostructured CVD diamond coatings on dust emission and machinability of SiC particle-reinforced metal matrix composite. Surface & Coatings Technology. Volume : 204. Numéro : 6-7. Pages : 1051-1055. 2009. Elsevier.

ABDEL-AAL H., NOUARI M., EL MANSORI M. Influence of thermal conductivity on wear when machining titanium alloys. Tribology International. Volume : 42. Numéro : 2. Pages : 359-372. 2009. Elsevier.

KIM J.-H., PIERRON F., WISNOM M., AVRIL S. Local stiffness reduction in impacted composite plates from full-field measurements. Composites Part A: Applied Science and Manufacturing. Volume : 40. Numéro : 12. Pages : 1961-1974. 2009. Elsevier.

LASRI L., EL MANSORI M., NOUARI M. Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept. Composites Science and Technology. Volume : 69. Numéro : 5. Pages : 684-692. 2009. Elsevier.

MEZGHANI S., EL MANSORI M., ZAHOUANI H. New criterion of grain size choice for optimal surface texture and tolerance in belt finishing production. Wear. Volume : 266. Numéro : 5-6. Pages : 578-580. 2009. Elsevier.

MKADDEM A., EL MANSORI M. On fatigue crack growth mechanisms of MMC: Reflection on analysis of "multi surface initiations". Materials and Design. Volume : 30. Numéro : 9. Pages : 3518-3524. 2009. Elsevier.

Jegou S., Kubler R., Barrallier L., Roch F. On residual stresses development during nitriding of steel: Thermochemical and time dependence. Advanced Materials Research . Volume : 89-91. Pages : 256-261. 2009. .

BEN TKAYA M., MEZLINI S., EL MANSORI M., ZAHOUANI H. On some tribological effects of graphite nodules in wear mechanism of SG cast iron: Finite element and experimental analysis. Wear. Volume : 267. Numéro : 1-4. Pages : 535-539. 2009. Elsevier.

MEZGHANI S., EL MANSORI M., SURA E. Wear mechanism maps for the belt finishing of steel and cast iron. Wear. Volume : 267. Numéro : 1-4. Pages : 86-91. 2009. Elsevier.

2008

AVRIL, S., HUNTLEY, J.M., PIERRON F., STEELE, D.D. 3D heterogeneous stiffness identification using MRI and the virtual fields method. Experimental Mechanics. Volume : 48. Numéro : 4. Pages : 479-494. 2008. Springer.

MKADDEM A., DEMIRCI I., EL MANSORI M. A micro-macro combined approach using FEM for modelling of machining: Cutting forces analysis. Composites Science and Technology. Volume : 68. Pages : 3123-3127. 2008. Elsevier.

A. Carradò , H. Pelletier, A. Fabre , L. Barrallier , I. N. Mihailescu A perspective of pulsed laser deposition (PLD) in surface engineering: alumina coatings and substrates. Key Engineering Materials. Volume : 378. Pages : 185-212. 2008. Trans Tech Publications, Switzerland.

Carrado A., Pelletier H., Fabre A., Barrallier L., Mihailescu I.N. A perspective of pulsed laser deposition (PLD) in surface engineering: alumina coatings and substrates. Key Engineering Materials . Volume : 384. Numéro : 384. Pages : 185-212. 2008. .

MEZGHANI S., EL MANSORI M. Abrasiveness properties assessment of coated abrasives for precision belt grinding. Surface and Coatings Technology. Volume : 203. Numéro : 5-6. Pages : 786-789. 2008. Elsevier.

SYED-MUHAMMAD K., TOUSSAINT E., GREDIAC M., AVRIL S., KIM J.-H. Characterization of composite plates using the virtual fields method with optimized loading conditions. Composite Structures. Volume : 85. Numéro : 1. Pages : 7-82. 2008. Elsevier.

ABDEL-AAL Hisham A., NOUARI M., EL MANSORI M, GINTING A. Conceptual tribo-energetic analysis of cutting tool protective coating delamination in dry cutting of hard-to-cut aeroengine alloys. International Journal of Advanced Manufacturing Technology. Volume : 36. Numéro : 3-4. Pages : 213-225. 2008. Springer.

MEZGHANI S., EL MANSORI M., MASSAQ A., GHIDOSSI P. Correlation between surface topography and tribological mechanisms of the belt-finishing process using multiscale finishing process signature. Comptes Rendus - Mecanique. Volume : 336. Numéro : 10. Pages : 794-799. 2008. Elsevier.

AVRIL, S., FEISSEL, P., PIERRON F., VILLON, P. Estimation of the strain field from full-field displacement noisy data: comparing finite elements global least squares and polynomial diffuse approximation. European Journal of Computational Mechanics. Volume : 17. Numéro : 5-7. Pages : 857-868. 2008. .

AVRIL, S., BONNET, M., BRETELLE, A.-S., GREDIAC, M., HILD, F., IENNY, P., LATOURTE, F., LEMOSSE, D., PAGNACCO, E., PIERRON, F. Identification from measurements of mechanical fields. Experimental Mechanics. Volume : 48. Numéro : 4. Pages : 381-402. 2008. Springer.

SUTTON, M.A., YAN, J., AVRIL, S., PIERRON, F., ADEEB, S.M. Identification of heterogeneous parameters in a welded specimen : constant stress and virtual fields method for material property estimation. Experimental Mechanics. Volume : 48. Numéro : 4. Pages : 451-464. 2008. Springer.

AVRIL, S., PIERRON F., YAN, J., SUTTON, M.A.. Identification of viscoplastic parameters and characterization of Lüders behaviour using Digital Image Correlation and the Virtual Fields Method. Mechanics of Materials. Volume : 40. Pages : 729-742. 2008. Elsevier.

KREMER A., DEVILLEZ A., DOMINIAK S.,, DUDZINSKI D., EL MANSORI M. Machinability of Al/SiC particulate metal-matrix composites under dry conditions with CVD diamond-coated tools. Machining Science and Technology. Volume : 12. Numéro : 2. Pages : 214-233. 2008. Taylor & Francis.

BIGERELLE M., HAGEGE B., EL MANSORI M. Mechanical modelling of micro-scale abrasion in superfinish belt grinding. Tribology International. Volume : 41. Numéro : 11. Pages : 992-1001. 2008. Elsevier.

Volovitch P., Masse J.E., Fabre A., Barrallier L., Saikaly W. Microstructure and corrosion resistance of magnesium alloy ZE41 with laser surface cladding by Al-Si powder. Surface and Coatings Technology. Volume : 202. Numéro : 20. Pages : 4901-4914. 2008. .

DEMIRCI I., MEZGHANI S., EL MANSORI M. On material removal regimes for the shaping of glass edges: Force analysis, surface topography and damage mechanisms. Tribology Letters. Volume : 30. Numéro : 2. Pages : 141-150. 2008. Springer.

Volovitch P., Barrallier L., Skvortsova Z., Traskine V. Percolation dans des matériaux polycristallins : application au mouillage des interfaces. J. de la Soc. de Chim. D.I. Mendeleïev. Volume : 52. Numéro : 1. Pages : . 2008. .

AVRIL, S., PIERRON F., PANNIER, Y., ROTINAT, R. Stress reconstruction and constitutive parameter identification in elastoplasticity using measurements of deformation fields. Experimental Mechanics. Volume : 48. Numéro : 4. Pages : 403-420. 2008. Springer.

MEZGHANI S., SURA E., EL MANSORI M. The effect of belt finishing process variables on the topography of finished surfaces. Tribology Transactions. Volume : 51. Numéro : 4. Pages : 413-421. 2008. Taylor & Francis.

LASRI L., NOUARI M., EL MANSORI M. Working parameters effects on machining-induced damage of fibre-reinforced composites: numerical simulation analysis. International Journal of Materials and Product Technology. Volume : 32. Numéro : 2-3. Pages : 136-151. 2008. Inderscience.

2007

KIM, J.-H., PIERRON, F., GREDIAC, M., WISNOM, M. A procedure for producing reflective coatings on plates to be used for full-field slope measurements by a deflectometry technique. Strain: an international journal for experimental mechanics. Volume : 43. Pages : 138-144. 2007. Blackwell Publishing.

SURA E., EL MANSORI M., GHIDOSSI P., DEBLAISE S., DAL NEGRO T., KHANFIR M. An energy analysis of belt polishing process and its applications to time cycle and tracking effects. Machining Science and Technology. Volume : 11. Pages : 217-234. 2007. .

EL MANSORI M., NOUARI M. Dry machinability of nickel-based weld-hardfacing layers for hot tooling. International Journal of Machine Tools and Manufacture. Volume : 47. Numéro : 11. Pages : 1715-1727. 2007. Elsevier.

MAQUIN, F., PIERRON, F. Experimental evidence of the microplasticity threshold in steel from heat dissipation measurements. Comptes rendus Mécanique. Volume : 335. Numéro : 3. Pages : 168-174. 2007. Elsevier.

PIERRON F., GREEN B., WISNOM M. Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part I: methodology. Composites Part A: Applied Science and Manufacturing. Volume : 38. Pages : 2307–2320. 2007. Elsevier.

PIERRON F., GREEN B., WISNOM M., HALLETT S. Full-field assessment of the damage process of laminated composite open-hole tensile specimens. Part II: experimental results. Composites Part A: Applied Science and Manufacturing. Volume : 38. Pages : 2321–2332. 2007. Elsevier.

AVRIL, S., PIERRON, F. General framework for the identification of elastic constitutive parameters from full-field measurements. International Journal of Solids and Structures. Volume : 44. Pages : 4978-5002. 2007. Elsevier.

KIM J.-H., PIERRON F., WISNOM M., SYED-MUHAMAD K. Identification of the local stiffness reduction of a damaged composite plate using the virtual fields method. Composites Part A: Applied Science and Manufacturing. Volume : 38. Numéro : 9. Pages : 2065-2075. 2007. Elsevier.

PIERRON, F., VERT, G., BURGUETE, R., AVRIL, S., ROTINAT, R., WISNOM, M. Identification of the orthotropic elastic stiffnesses of composites with the virtual fields method: sensitivity study and experimental validation. Strain: an international journal for experimental mechanics. Volume : 43. Numéro : 3. Pages : 250-259. 2007. Blackwell Publishing.

MKADDEM A., GHIDOSSI P., CREQUY S., EL MANSORI M. Impact of machining parameters on fatigue behaviour of 15%vol.-SiCp reinforced aluminium matrix composites. Experimental Analysis of Nano and Engineering Materials and Structures. Volume : B. Numéro : 2T10. Pages : 181-182. 2007. Springer.

XAVIER, J., AVRIL, S., PIERRON, F., MORAIS, J. Novel experimental approach for the characterisation of the LR stiffness parameters of clear wood using a single specimen. Holzforschung. Volume : 61. Pages : 573-581. 2007. Walter de Gruyter.

MOULART R., ROTINAT R., PIERRON F., LERONDEL G. On the realization of microscopic grids for local strain measurement by direct interferometric photolithography. Optics and Lasers in Engineering. Volume : 45. Numéro : 12. Pages : 1131-1147. 2007. Elsevier.

FOUILLAND L., EL MANSORI M., GERLAND M. Role of welding process energy on the microstructural variations in a cobalt base superalloy hardfacing. Surface and Coatings Technology. Volume : 201. Pages : 6445-6451. 2007. .

EL MANSORI M., MKADDEM A. Surface plastic deformation in dry cutting at magnetically assisted machining. Surface and Coatings Technology. Volume : 202. Numéro : 4-7. Pages : 1118-1122. 2007. Elsevier.

EL MANSORI M., SURA E., GHIDOSSI P., DEBLAISE S., DAL NEGRO T., KHANFIR A. Toward physical description of form and finish performance in dry belt finishing process by a tribo-energetic approach. Journal of Materials Processing Technology. Volume : 182. Pages : 498-511. 2007. .

Revues nationales

2011

Guillemot G., Iost A., Van Gorp A., Allain S. Caractérisation des aciers innovants par essais mécaniques croisés. Matériaux et Techniques. Volume : 99. Pages : 227-238. 2011. .

Guillemot G., Iost A., Van Gorp A., Allain S. Caractérisation des aciers innovants par essais mécaniques croisés. Matériaux et Techniques. Volume : 99. Pages : 227-238. 2011. .

Aissat S., Iost A., Guillemot G., Benarioua Y., Mechmeche M. Caractérisation des propriétés mécaniques par nanoindentation d’un traitement de diffusion et d’un revêtement pour l’amélioration de la résistance à l’usure des aciers à bas carbone. Mécanique et Industries. Volume : 12. Pages : 379-387. 2011. .

Aissat S., Iost A., Guillemot G., Benarioua Y., Mechmeche M. Caractérisation des propriétés mécaniques par nanoindentation d’un traitement de diffusion et d’un revêtement pour l’amélioration de la résistance à l’usure des aciers à bas carbone. Mécanique et Industries. Volume : 12. Pages : 379-387. 2011. .

Jegou S., Barrallier L., Kubler R., Somers M.A.J. Évolution des contraintes résiduelles dans la couche de diffusion d’un acier modèle Fe-Cr-C nitruré. Traitements & Matériaux . Volume : 411. Pages : 21-27. 2011. .

2010

Hennebelle F., Coorevits T., Sessa P. À la poursuite des étalons : Engrenage, le parcours d'une accréditation Cofrac réussie. CETIM Information 2010. Volume : 212. Pages : 18-20. 2010. .

2008

Belhadj A., Bouhafs M., Bessrour J., Barrallier L. Étude de la genèse des contraintes résiduelles lors de la trempe continue dans la masse de l’acier 36NiCrMo16. Materiaux et Techniques . Volume : 85. Numéro : 4-5. Pages : 209-229. 2008. .

2007

GHIDOSSI P., EL MANSORI M., SURA E., GEOFFROY R, DEBLAISE S. Belt grinding process: An energetic approach to cycle-time and oscillation frequency effects. Mécanique & Industries. Volume : 8. Numéro : 6. Pages : 551-558. 2007. .

GIRAUDEAU A, EL MANSORI M. The frequency response as machinability signature. Proposal for a methodology. Mécanique & Industries. Volume : 8. Numéro : 6. Pages : 529-536. 2007. .

NOUARI M., ABDEL-AAL H.A., EL MANSORI M., GINTING A. Triboenergetic analysis of coating layers delamination when dry machining aeronautical alloys. Mécanique & Industries. Volume : 8. Numéro : 4. Pages : 325-335. 2007. .

Congrès internationaux avec comptes rendus

2014

Julian Soulacroix, Bruno Michel, Jean-Marie Gatt, Laurent Barrallier, Régis Kubler CLEAVAGE IN POLYCRYSTALS: EXPERIMENTS AND MODELING. ACEX 2014 : 8th INTERNATIONAL CONFERENCE ON ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENT. 2014.

2013

Staia M.H., Puchi-Cabrera E.S., Santana Y., La Barbera-Sosa J.G., Iost A., Chicot D., De Baets P. Increase of the load carrying capacity of aluminum 2024-T3 by means of a NiP-CrN-DLC coating. 5ThConference on Sustainable Construction and Design 2013. 2013.

Van Gorp A., Bigerelle M., Najjar D. Relationship between brighness and roughness on polypropylene abraded surfaces. 40th Leeds-Lyon Symposium on Tribology . 2013.

2012

Fellah M., Labaïz M., Assala O., Iost A. Caractérisation tribologique et électrochimique d’une tige fémorale en acier inoxydable AISI 316l. 24èmes Journées Internationales Francophones de Tribologie. 2012.

Bounichane B., Jomaa W., Guillemot G., Ben Fredj N., Bigerelle M. Caractérisation multi-échelle de l’usinabilité de l’acier AISI 304L . 21èmes Journées Internationales Francophones de Tribologie. 2012.

Bigerelle M., Najjar D. Caractérisation multi-échelle des mécanismes d’abrasion par la théorie du chaos . 21èmes Journées Internationales Francophones de Tribologie. 2012.

Zairi A., Nouveau C., Besnard A., Martin N., Herbst F., Imhoff L., Heintz O., Iost A., Ben Cheik Larbi A. Comparative Study of CrSiN films deposited using RF magnetron sputtering. 13th International Conference on Plasma Surface Engineering. 2012.

Bigerelle M., Nianga JM., Najjar D., Iost A. Curvature Radius Estimation for a Fractal Surface Application. The Third International Conference on Surface Metrology. 2012.

Fabre A., Raynaud S., Vincenti J. Development of measurement standard for three-dimensional roughness. 3rd International Conference on Surface Metrology. 2012.

Guillemot G., Van Gorp A., Coorevits T., Iost A. Estimation of the constitutive law by dual Small Punch Test and Instrumented Indentation. Advanced Materials and Structures. 2012.

Rudermann Y., Bigerelle M., Iost A. Evaluation de la robustesse de tôles prélaquées. 21 èmes Journées Internationales Francophones de Tribologie. 2012.

Costes P., Bigerelle M., Iost A. Fabrication de surfaces multi-échelles par prototypage rapide pour l’optimisation des surfaces fonctionnelles brutes en fonderie : Partie1-Conception de surfaces fractales. 21èmes Journées Internationales Francophones de Tribologie. 2012.

Costes P., Bigerelle M., Iost A. Fabrication de surfaces multi-échelles par prototypage rapide pour l’optimisation des surfaces fonctionnelles brutes en fonderie : Partie2-Optimisation des paramètres de prototypage. 21èmes Journées Internationales Francophones de Tribologie. 2012.

Bigerelle M., Favergeon J., Iost A. Fractal Dimension of Grain Boundary during Heating Comparison between Images Analyses and Monte Carlo Simulation. 8th Int. Conf. on diffusion in materials. 2012.

Xia Y., Bigerelle M., Marteau J., Mazeran P.-E., Bouvier S., Iost A. Influence of Roughness on first contact detection error: A novel quantitative model study. The Third International Conference on Surface Metrology. 2012.

Lathuile E., Bigerelle M., Iost A. Mécanismes de transfert de rugosité Tôle - Cylindre lors du Laminage à Froid. 21èmes Journées Internationales Francophones de Tribologie. 2012.

Bigerelle M., Dubar L., Jourani A., Fabre A. Multi-scale modelling of 3D contact pressure on rough surfaces: statistical approach. 3rd International Conference on Surface Metrology. 2012.

Bigerelle M., Favergeon J., Mathia T., Iost A. Multiscale modelling of morphological evolution of rough surface during superficial, volume and evaporation-condensation diffusions. 8th Int. Conf. on diffusion in materials. 2012.

Zairi A., Martin N., Nouveau C., Besnard A., Herbst F., Heintz O., Imhoff L., Iost A., Ben Cheik Larbi A. Nitrogen pulsing to modify the properties of Chromium nitride thin films DC magnetron sputter deposited. 13th International Conference on Plasma Surface Engineering . 2012.

Guillemot G., Bigerelle M., Antoni J., Anselme K. Order of surfaces and tool machining processes. 21èmes Journées Internationales Francophones de Tribologie. 2012.

Khawaja Z., Guillemot G., El Mansori M., Bigerelle M. Pertinence du choix de l’ondelette pour caractériser et modéliser les surfaces abrasées. 21èmes Journées Internationales Francophones de Tribologie. 2012.

Marteau J., Bigerelle M., Bouvier S., Iost A. Reflection on the measurement and exploitation of the topography of the indentation print. The Third International Conference on Surface Metrology. 2012.

Dubois A., Lathuile E., Bigerelle M., Meresse D., Iost A. Roughness Transfer in the Cold Rolling Process. The Third International Conference on Surface Metrology. 2012.

Bigerelle M., Iost A., Correvits T., Zahouani H., Anselme K., El Mansori M., Najjar D., Guillemot G., Mazeran P-E., Van Gorp A. Un système expert d’analyse des surfaces en tribology, projet Fondation Cetim. 21èmes Journées Internationales Francophones de Tribologie. 2012.

2011

Bigerelle M., Mathia T., Iost A., Coorevits T., Anselme K. An Expert System to Characterize the Surfaces Morphological Properties According to their Tribological Functionalities. 38th Leeds-Lyon symposium on Tribology - Energy and Health. 2011.

Boripatkosol S., Leleu S., Gibaru O., David J.-M., Coorevits T., Rousset N., Sessa P. Calibration of capacitive sensors and electronic levels for the straightness measurements using multiprobe method. 15th International Congress of Metrology. 2011.

Bigerelle M., Nianga J-M., Dubar L., Iost A. Chaos Theory and Signal Analysis for the Topographical Surfaces of Materials Tooled by Turning Machining Process. The 6th International Conference Surveillance. 2011.

Fabre A., Raynaud S., Brenier B. Effect of measurement conditions on three-dimensional roughness values, and development of measurement standard. . 13th International Conference on Metrology and Properties of Engineering Surfaces 2011. 2011.

Deleuze C., Fabre A., Barrallier L., Molinas O. Forging and shoot peening contribution on residual stresses for a textured biphasic titanium alloy. ECRS 8. 2011.

Guillemot G., Bigerelle M., Antoni J., Anselme K. How to characterize the regularity of surface topographies?. Metrology and Properties of Engineering Surfaces 2011. 2011.

Marhabi D., Iost A., Smati M., Nasri M., Nianga J.-M. Model prediction of fatigue crack propagation in base and corroded metal. Conférence internationale sur la conception vis-à-vis de la fatigue. 2011.

M. Nasser, A. Chamekh, G. Guillemot, M. Nasri, A.Iost Modélisation du comportement élastoplastique d’un revêtement Fe-Zn (GA) par nanoindentation : approche inverse basée sur les plans d’expériences et les algorithmes génétiques multiobjectifs. 20ème congrès français de mécanique. 2011.

Renaud P., Desvignes M., Kubler R., Briestiel P., Barrallier L. Numerical Simulations of the shot peening process of materials initially treated by carburizing or carbonitriding. INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES. 2011.

Renaud P., Desvignes M., Kubler R., Briestiel P., Barrallier L. Numerical simulations of the shot peening process of materials initially treated by carburizing or carbonitriding. ECRS8. 2011.

Jégou S., Barrallier L., Kubler R. Precipitation induced residual stresses during nitriding of steels. INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES. 2011.

Hennebelle F., Coorevits T., Sessa P. Presentation of the first COFRAC accreditation on Coordinate Measuring Machine. 15th International Congress of Metrology. 2011.

Khawaja Z., Guillemot G., El Mansori M., Bigerelle M. Relevance of Wavelet Choice to Characterize and Model the Abrasive Surfaces. 38th Leeds-Lyon Symposium on Tribology - Energy and Health. 2011.

Kubler R., Desvignes M., Fabre A. Representative simulation of the shot peening process. INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES . 2011.

Jégou S., Barrallier L., Kubler R. Residual stress development during nitriding of steels. ECRS8. 2011.

Kubler R., Barrallier L., Valot C., Palancher H. Stress analysis in UMo-Al fuel using X-ray diffraction . ECRS8. 2011.

Rahil I., Nouveau C., Fabre A., Stanieshevsky A. Synthesis and mechanical properties of Mo-Cr-N hard coatings by dual RF magnetron sputtering for wood machining. 22nd European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes and Nitrides 2011. 2011.

Khawaja Z., Guillemot G., Mazeran P.-E., El Mansori M., Bigerelle M. Wavelet theory and belt finishing process, influence of wavelet shape on the surface roughness parameter values. Metrology and Properties of Engineering Surfaces 2011. 2011.

Khawaja Z., Guillemot G., Mazeran P.-E., El Mansori M., Bigerelle M. Wavelet theory and belt finishing process, influence of wavelet shape on the surface roughness parameter values. Metrology and Properties of Engineering Surfaces 2011. 2011.

2010

Guillemot G., Avettand-Fènoël M.-N., Iost A., Foct J. A Cellular Automaton / Finite Element model for predicting grain texture development in galvanized coatings. International Conference on Advances in Materials and Processing Technologies (AMPT) 2010. 2010.

Baklouti M., Cristol A.-L., Van Gorp A., Najjar D., Desplanques Y., Elleuch R. Analyse multi-échelle des propriétés morphologiques de surfaces frottées en freinage. premier congrès international sur les Innovations en Mécaniques Passives et Actives (impact 2010). 2010.

Coorevits T., Hennebelle F., Charpentier B. Behavior of touch trigger dynamic probes: correction and calibration methods, Transverse disciplines in metrology. 13th International Metrology Congress. 2010.

Tlili B., Nouveau C., Guillemot G., Imhoff L., Favre A., Roumie M., Rahil I. Deposition, characterization and wear performance of PVD multilayer coatings. Advances in Materials and Processing Technologies (AMPT) 2010. 2010.

Marray T., Jacquet P., Checot D., Fabre A., Barrallier L. End uses mechanical properties settled by modified sintering condition of the metal injection molding process . International Conference on Advances in Materials and Processing Technologies (AMPT) . 2010.

F. Lefebvre, M. François, J. Cacot, C. Hemery, P. Le-bec, E. Baumhauer, D. Bouscaud, T. Bergey,, Blaize, D. Gloaguen, JL. Lebrun, A Cosson, R Kubler, Y Cheynet, E. Daniel, H. Michaud,, JC. Monvoisin, P. Blanchet, P. Allain, Y Mrini, JM. Sprauel, P. Goudeau, P. Barbarin, C. Charles, JM. Le Roux, W. Seiler, C. Fischer, L. Desmas, A. Ouakka, MJ. Moya, Y. Bordiec External reference samples for residual stress analysis by X-ray diffraction. ECRS 8, 8th European Conference on Residual Stresses . 2010.

Deleuze C., Fabre A., Barrallier L., Molinas O. Forging and milling contribution on residual stresses for a textured biphasic titanium alloy. International Conference on Advances in Materials and Processing Technologies (AMPT) . 2010.

MKADDEM A., EL MANSORI M. Friction model for an intermediate orientation and density of fibres in dry cutting of composites. ESDA2010. 2010.

Behnamghader A., Najjar D., Iost A., Benayoun S. Mechanical behaviour study of plasma-spread hydroxyapatite coatings onto Ti6Al4V substrate using scratch test. International Conference on Processing & Manufacturing of Advanced Materials “THERMEC 2009. 2010.

Bigerelle M., Mathia T., Iost A. Modélisation multi-échelle analytique de la modification morphologique des surfaces frottantes en température. JIFT (Journées Internationales Francophones de Tribologie) 2010. 2010.

Baklouti M., Elleuch R., Cristol A.-L., Najjar D., Desplanques Y. Morphological, mechanical and tribological characterizations of a brake lining material. Fifth International Conference on Advances in Mechanical Engineering and Mechanics (TSS ICAMEM 2010). 2010.

Renaud P., Desvignes M., Briestiel P., Kubler R., Barrallier L. Numerical Simulations of the shot peening process of materials initially treated by carburizing or carbonitriding. International Conference on Advances in Materials and Processing Technologies (AMPT) . 2010.

Khawaja Z., Guillemot G., El Mansori M., Bigerelle M. Pertinence du choix de l’ondelette pour caractériser et modéliser les surfaces abrasées. JIFT (Journées Internationales Francophones de Tribologie) 2010. 2010.

Benlatreche Y., Nouveau C., Marchal R., Guillemot G., Imhoff L., Fabre A., Roumie M., Rahil I. Physical and mechanical properties of CrVN ternary system for wood machining applications. Advances in Materials and Processing Technologies (AMPT) 2010. 2010.

Jegou S., Barrallier L., Kubler R. Precipitation induced residual stresses during nitriding of steels. International Conference on Advances in Materials and Processing Technologies (AMPT) . 2010.

Kubler R., Desvignes M., Fabre A. Representative simulations of the shot peening process . International Conference on Advances in Materials and Processing Technologies (AMPT) . 2010.

Khawaja Z., Guillemot G., Mazeran P.-E., El Mansori M., Bigerelle M. The wavelet theory and the belt finishing process – Influence of the wavelet shape on the surface roughness parameter values. Advances in Materials and Processing Technologies (AMPT) 2010. 2010.

2008

MEZGHANI S., EL MANSORI M. Abrasiveness properties assessment of coated abrasives for precision belt grinding. The 35th International Conference on Metallurgical Coatings and Thin Films. 2008.

LASRI L., NOUARI M., EL MANSORI M. Numerical analysis of damage initiation when machining aeronautical fiber-reinforced composites. International Symposium on Composites and Aircraft Materials ACMA. 2008.

MKADDEM A., EL MANSORI M. On fatigue crack growth mechanisms of MMC: reflection on analysis of "Multi Surface Initiations". Advances in Materials and Processing Technologies. 2008.

EL MANSORI M., MEZGHANI S., SABRI L., ZAHOUANI H. On the concept of process signature in the analysis of multi-stage surface formation. Advances in Materials and Processing Technologies. 2008.

2007

MKADDEM A., EL MANSORI M. Coaxial magnetic field for improving cutting conditions during steel machining. 2nd International Conference on Design and Modelling of Mechanical System. 2007.

ZAHOUANI H., MEZGHANI S., EL MANSORI M. Effect of roughness scale on contact stiffness between solids. 11th International Conference on Metrology and Properties of Engineering Surfaces. 2007.

MEZGHANI S., EL MANSORI M Identification de paramètres tribologiques appropriés pour la détermination des surfaces cylindres moteurs non conforme. 2nd International Conference on Design and Modelling of Mechanical System. 2007.

MEZGHANI S., SURA E., EL MANSORI M. Identification of working variables effect on surface signature by belt finishing. 62nd STLE Annual Meeting. 2007.

MEZGHANI S., EL MANSORI M. Identification par décomposition multi-échelle de la qualité du fini de surfaces toilées. 8ème Congrès de Mécanique. 2007.

MKADDEM A., GHIDOSSI P., CREQUY S., EL MANSORI M. Impact of machining parameters on fatigue behaviour of 15%vol.-SiCp reinforced aluminium matrix composites. 13th International Conference on Experimental Mechanics ICEM. 2007.

MEZGHANI S., EL MANSORI M., ZAHOUANI H. New criterion of grain size choice for optimal surface texture and tolerance in belt finishing production. 11th International Conference on Metrology and Properties of Engineering Surfaces. 2007.

MKADDEM A., EL MANSORI M., GHIDOSSI P. Quelques aspects de la physique de la coupe assistée par champ magnétique. 8ème Congrès de Mécanique. 2007.

EL MANSORI M., MKADDEM A. Surface Plastic Deformation in Dry Cutting at Magnetically-Assisted Machining. 34th International Conference on Metallurgical Coatings and Thin Films ICMCTF. 2007.

MEZGHANI S., EL MANSORI M., ZAHOUANI H. Surface tribo-classification of cylinder liners using artificial neural network. 62nd STLE Annual Meeting. 2007.

MEZGHANI S., SURA E., EL MANSORI M. Wear-map analysis on of the abrasive grits in belt finishing process. thd International Conference on Tribology in Manufacturing Processes. 2007.

Congrès nationaux avec comptes rendus

2013

Soulacroix J., Michel B., Gatt J.M., Kubler R., Barrallier L. Approche multi-échelle de l’hétérogénéité de déformation du dioxyde d’uranium. CSMA 2013- 11e Colloque National en Calcul des Structures. 2013.

Soulacroix J., Michel B., Gatt J.M., Kubler R., Barrallier L. Comportement micromécanique de l´UO2 : anisotropie du monocristal et contraintes internes associées dans le polycristal. Congrès Francais de Mécanique 2013. 2013.

Antoinat L., Kubler R., Achard G., Barrallier L. Étude d'un programmateur d'impact solide équivalent à un impact à l'eau.. . 2013.

Kubler R., Desvignes M., Renaud P., Fabre A., Barrallier L. Simulation du grenaillage de précontrainte: de l’impact monobille au grenaillage industriel sur pièce traitée.. CSMA 2013- 11e Colloque National en Calcul des Structures. 2013.

2012

Zheng S., Mac D.H., Coorevits T., Clénet S., Mipo J.C. Modélisation des incertitudes géométriques d’un stator en vue d’une quantification des performances d’une machine électrique. Numelec 2012. 2012.

2011

Baklouti M., Cristol A.L., Najjar D., Desplanques Y., Elleuch R. Caractérisation expérimentale des performances en freinage d’un matériau composite organique pour garniture poids lourd. Journées Francophones de Tribologie 2011. 2011.

Baklouti M., Cristol A.L., Najjar D., Desplanques Y., Elleuch R. Caractérisation expérimentale des performances en freinage d’un matériau composite organique pour garniture poids lourd. Journées Francophones de Tribologie 2011. 2011.

Khawaja Z., Guillemot G., El Mansori M., Bigerelle M. Décomposition en ondelettes et procédé d’abrasion. Influence du choix d’ondelette dans l’estimation des paramètres de rugosité et de l’échelle pertinente d’analyse. Journées Francophones de Tribologie 2011 . 2011.

M. Smati, M. Nasri, D. Marhabi, A.Iost Influence d’une eau fortement salée sur la propagation de fissure par fatigue pour un acier inoxydable 17-4 PH. 20ème congrès français de mécanique. 2011.

Li J., Chaise T., Nélias D., Robin V., Kubler R., Desvignes M., Taheri S., Rouhaud E. Une méthode de prédiction des contraintes résiduelles dans une structure mince ayant subie un traitement de billage ultrasonore. 10e Colloque National en Calcul des Structures, 9-13 mai 2011- Giens, France. 2011.

Li J., Chaise T., Nélias D., Robin V., Kubler R., Desvignes M. Une méthode de prédiction des contraintes résiduelles dans une structure mince ayant subie un traitement de billage ultrasonore. . CSMA 2013- 10e Colloque National en Calcul des Structures. 2011.

2010

Guillemot G., Iost A., Van Gorp A., Allain S. Caractérisation des aciers innovants par essais mécaniques croisés. Matériaux 2010. 2010.

Jarrah A., Guillemot G., Najjar D., Iost A., Bigerelle M., Nianga J.-M. Statistique des valeurs extrêmes pour l’estimation de la profondeur maximale en corrosion par piqûres. Matériaux 2010. 2010.

Congrès sans comptes rendus

2012

Rahil I., Nouveau C., Imhoff L., Heintz O., Fabre A., Barrallier L. Etude des propriétés tribologiques des revêtements CrN, MoN et CrxMo1-XN déposés sur outils de coupe en WC-Co. Journées Internationales Francophones de Tribologie 2012 (JIFT). 2012.

Antoinat L., Kubler R., Barrallier L. Etude paramétrique de l’impact d’un tube cylindrique sur un massif indéformable. Journées Internationales Francophones de Tribologie 2012 (JIFT). 2012.

Fallot G., Barrallier L. Nitruration de l’acier de nuance 32CrMoV13 en thermobalance. Journées Internationales Francophones de Tribologie 2012 (JIFT). 2012.

Fabre A., Masse J.E., de Bodinat E., Riocreux R. Réponse au frottement et à l’usure d’un alliage de magnésium traité par refusion laser avec apport de poudre aluminium-silicium contre du 100Cr6 . Journées Internationales Francophones de Tribologie 2012 (JIFT). 2012.

2011

Coorevits T., Hennebelle F., Charpentier B. Comportement des palpeurs dynamiques à déclenchement : méthodes de correction et de calibration. Technologies et Formations. 2011.

Hennebelle F., Coorevits T. Détermination des incertitudes en métrologie 3D. Journée Technique - Numérisation 3D & Applications. 2011.

Coorevits T., Hennebelle F. Evaluation des incertitudes de mesure. GDR ISIS - thème B - Image et Vision - "Mesure Industrielle par Vision" . 2011.

2010

Capellan Perez I., Guillemot G., Benabou A., Clénet S. Détermination de la Loi de Comportement Macroscopique des SMC à Partir d’Imagerie au MEB : Etude de l’Influence des Conditions d’Observation. MGE 2010 (Matériaux pour le Génie Electrique). 2010.

Hennebelle F., Coorevits T. Détermination des incertitudes de mesures sur machines à mesurer tridimensionnelles. Rencontres Métrologie et Entreprises. 2010.

Ouvrages ou chapitres d'ouvrages

2013

Montmitonnet P., El Mansori M., Barrallier L., Fabre A., Kubler R. Tribologie: Approches scientifiques et application industrielles - Actes des 24e Journées Internationales Francophones de Tribologie (JIFT2012). Publisher : Presse des Mines- Sciences de la matière. Editor : . Volume : . Pages : . 2013.

2010

Bigerelle M., Naceur H., Iost A. Analyses of the instabilities in the discretised diffusion equations via the information theory. Publisher : . Editor : . Volume : 3. Pages : . 2010.

Fournier B., Rupin N., Bigerelle M., Najjar D., Iost A., Vallée T. Fitting a Generalized Lambda Distribution using an adequacy criterion. Publisher : . Editor : . Volume : . Pages : 279-309. 2010.

Fournier B., Rupin N., Bigerelle M., Najjar D., Iost A. Use of the Generalized Lambda Distributions in Materials Science, with examples in fatigue lifetime, fracture mechanics, polycrystalline calculations, and pitting corrosion. Publisher : . Editor : . Volume : . Pages : 1207-1243. 2010.

Show BibText
Export BibText